Por favor, use este identificador para citar o enlazar este ítem:
http://comimsa.repositorioinstitucional.mx/jspui/handle/1022/355| EFFECT OF THE SURFACE TREATMENT WITH Nd: YAG LASER ON THE WEAR RESISTANCE OF CoCr ALLOY | |
| MELVYN ALVAREZ VERA | |
| ISACC ANTONIO ORTEGA RAMOS | |
| Acceso Abierto | |
| Atribución-NoComercial-SinDerivadas | |
| TRATAMIENTO SUPERFICIAL DE MATERIALES POR LÁSER | |
| Wear resistance in metal-metal joint prostheses remains widely studied, due to the detached debris that causes the implant loosening failure. The present work aims to explore the tribological behavior of the modified surface using a pulsed Nd: YAG laser with different parameters such as power, speed and spot diameter. The microstructural analysis of the laser modified surface were characterized using metallographic techniques, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), atomic force microscopy (AFM), X-ray diffraction (XRD), and Nanoindentation test. A pin-on-disc tribometer was used to evaluate the wear performance of the remelted surface under dry sliding condition. The results showed that typical interdendritic structures in the as cast identified as secondary phases M23C6 eutectic were refined due to the heat input and fast cooling rate during the laser treatment. The refined microstructure showed an enhancement in the tribological performance, increasing the wear resistance. The correlation among the laser parameters, microstructural effect and the influence in the wear resistance is discussed. | |
| 19-10-2019 | |
| Ítem publicado en memoria de congreso | |
| Español | |
| Estudiantes | |
| EFFECT OF THE SURFACE TREATMENT WITH Nd: YAG LASER ON THE WEAR RESISTANCE OF CoCr ALLOY. Melvyn Alvarez Vera, Isacc A. Ortega-Ramos, Jorge Leobardo Acevedo Dávila, H. Manuel Hernandez García, Rita Muñoz Arroyo, Arturo Martinez. XXVII INTERNATIONAL MATERIALS RESEARCH CONGRESS | |
| INGENIERÍA Y TECNOLOGÍA | |
| Versión publicada | |
| publishedVersion - Versión publicada | |
| Aparece en las colecciones: | ARTÍCULOS/ CAPÍTULOS DE LIBRO / MEMORIAS DE CONGRESO |
Cargar archivos:
| Fichero | Descripción | Tamaño | Formato | |
|---|---|---|---|---|
| ABSTRACT-ART-ISACC.pdf | EFFECT OF THE SURFACE TREATMENT WITH Nd: YAG LASER ON THE WEAR RESISTANCE OF CoCr ALLOY. Melvyn Alvarez Vera1, Isacc A. Ortega-Ramos1, Jorge Leobardo Acevedo Dávila2, H. Manuel Hernandez García1, Rita Muñoz Arroyo1, Arturo Martinez3 | 1.3 MB | Adobe PDF | Visualizar/Abrir |